Kegfiller for KeyKeg

ACAS CraftFill™ Keg filling system.

Reduce product waste, labour cost and faults. But most important, remove operator variance and lower your DO!

ACAS CraftTurn™ Keg handling system.

Good and safe Keg handling is a key factor to keep your operators safe and to stay in compliance with local health and safety regulations !

CRAFTFILL
Our latest developement is the CraftFill™ keg filler for mainly one-way kegs. The filler is approved and endorsed by KeyKeg, the largest producer of one-way kegs in the world, and complies to their Fit-to-Fill standard. Below is a customer review from Gravity Brewery in Budapest. The CraftFill is equipped with a mechanical fillervalve that doesnt open unless a pressurized keg is present. Patent pending.

NO KEG – NO FILL
The filler is easy to use, effective and gives a small footprint in your brewery. No power needed, only compressed air! Options range from 1, 3 or 5 filling heads, and can give up to 900l/hr pr. fillinghead. Other options are the New CraftTurn gravity conveyor with tilted end for safe palletizing of kegs. Fillingvalves for steelkegs with flow sensor technology and other oneway kegs is also available. The newest developement is the CraftFill “P” for purge. We have implemented a purge function which flushes the keg with CO2/N before filling with beer. Real test on KeyKegs and Polykegs at To Ol brewery in Svinninge, Denmark shows a decrease in DO pick-up by 70-80%.

CUSTOMER TESTEMONIAL
Mr. Greg Kieckhefer, owner of Gravity Brewery, Budapest:

We’re filling batches every week and getting a lot quicker now that we’re a bit more familiar with the rig. The beauty of it for us remains the simple mechanical design philosophy — we can see and physically control everything, and if anything goes wrong, we have a very short, easy checklist to work out a fix. Nitro & high-carb batches run beautifully on a slightly slower fill, standard batches fill very quickly with no foam, and there are very few potential trouble areas to keep track of. Well done!

Patented kegpressure operated filling valve.

Engineered and manufactured in Norway.

Local representation Worldwide.

8 -10 weeks delivery of new machines.

  • No keg – No fill
    safety function

  • Low O2 pick-up <10ppb
    spear always full prior to fill the next keg.

  • Fully CIP compatible.
    following the standards

  • Superior ROI
    vs. automatic systems with similar filling capacity. 1:3 cost ratio

  • No power needed
    only compressed air.

  • 1,3 or 5 heads
    up to 50kegs/h pr. fillinghead.

  • CE/UL approved

Frequently Asked Questions

We need as much information as possible about the project; wanted capasity, space available,  budget etc. Communication throughout the whole process is key for a successful end result, so we follow the whole project till end of installation and startup.

ACAS is in the forefront with its turnkey solutions, combining quality products into complete filling and packaging lines. Early involvement in the projects is key to optimize the solution and to spend your investments well. We’re always seeking the best and most effective solution regarding space available, your budget or your timeline. If you want to implement some of your old equipment or equipment from other suppliers, we make it happen!